04-03
Our led bulbs can be used on automotive 12 volt led lights and 24 volt led truck lights for replacing or upgraing from stock. Using the Vehicle LED Bulb Finder, you can select the year, make, and model of your vehicle, then select the application you want to replace it, you will be able to know the type of bulb your vehicle needs.
04-03
We have CE, ROSH certification. DOT and E-mark do not have the rule standard for led headlight conversion kit at the moment.
04-03
T/T, paypal, Western Union and MoneyGram.
04-03
Double polarity means we makes the 1157 3157 7743 bulbs be double non-polarity. 1157, 3157 and 7443 bulbs have high beam and low beam. So when we want to make these bulbs non-polarity, we will need to put two pcs of no-poparity components in it. That is called double non-polarity. CK is a different concept. Just because the led bulbs with double polarity deisgn can be compatible with the CK wiring, so they are commonly discussed together by people.
04-03
Decoder can solve the flicker problem. Resistor can solve the power shortage problem. (a error alarm on the dashboard) Decoder and resistor both have the canbus function, sometimes it work out the canbus problem together.
04-03
That is because the electronic components has a floating range value on parameters. We have indicated the product working current with a floating range value. This is unavoidable.
04-03
It does not have any built-in resistor.
04-03
It does not have any built-in resistor.
04-03
A little current will left in the circuit although you turn off the engine. And LEDs can light up with small power supplied. Our 2in1 headlight mate can solve this problem.
04-03
The operating temperature is about -40° - 90°.
04-03
If the heat sink of led headlight is hot, that means the heat transfer well from LEDs to heat sink. Will the led bulb have problem because of high operating temperatrue? It depends on whether the operating temperature is continuely higher than the Junction temperature of LEDs. Please refer to our led headlight for more details.
04-03
The CK is a special mode of wire connection in some USA vehicle. The positions of positive and negative electrodes are different from the normal one.
04-03
3157 bulb is widely used on brake light, high beam is for brake light and low beam is for rear DRL.
04-03
We have a standard return process for broken and defective product. Please check the document below.
04-03
For the types of adapter, you can view our product list.
