Published by Ava04 04,2019
M3 led headlight was launched on March 2019. it is a high performance led headlight with High-speed turbo fan, the high beam led bulb is housing with 12 pcs Lumileds ZES chip and low beam led bulb has 6 pcs of Lumileds ZES chip. The maximum light output of M3 led bulb can reach 5000 lumens (a set of led headlight). Its appearance is close to the halogen bulb. M3 series bulb is housing on a 1.5mm extremely thin copper PCB board with opposing LEDs on two sides that decrease the distance between two side LEDs. With this special design, it can make the thickness of the light source close to the tungsten filament of the halogen bulb. Emitting ECE/DOT standard light beam pattern in reflector headlight housing without any dark spot. The M3 headlight equipped with a high-speed cooling system, which can make the bulb body in a stable condition with a 1300 rpm fans. It is easy to install as well, that would not influence to mount the dust cover. The bulb of M3 used 6003 Aluminium al...
Published by Ava01 24,2019
Standards for Headlight Beam Patterns — edited by Kevin This article will discuss headlight beam patterns and the standards that agencies such as ECE/DOT require. The following points will be addressed to help gain a better understanding: 1. What does the original ECE front headlight testing graphic look like? 2. The original ECE front headlight testing graphic combine with driveway image 3. Some testing points that need to pay more attention to 4. Other standards used in other countries and areas (SAE/ADR) How do we define a safe and effective headlight beam pattern and what are the standards it has to meet? Most people would say they want a headlight that is super bright, covers a large area in front of the vehicle and has uniform illumination with no dark spots. But can this be achieved and still meet the standards set forth by ECE (E-mark) or SAE (DOT)? The short answer is, YES! The keys to optimal performance are to be sure the light is...
Published by Ava12 13,2018
This is our new M2 LED Headlight series launched on November 2018. Its single beam housing with 2 pics CR CSP led chip while the dual beam housing with 4 pics leds, M2 led headlight kit can reach 6000 Lumen output. With an advanced dynamic design, high counterclockwise and low vibration of the fan, the M2 LED Headlight to work out the issue of noise in a safe situation. The bulb of M2 used 6003 Aluminum alloy, and bulb body is integrated by the hot-pressing process for better heat dissipation. And it is using double layer copper PCB which provides a good heat dissipation. Because of the high adhesion between the double layer copper PCB, it is beneficial to the heat dissipation and extends the lifespan of LEDs, the LED chips would not burn out easily. All in one style, the length of the bulb body is 77mm, the width of the heat sink is 31mm. The compact bulb body is close to the halogen bulb size LED Bulb Operating Temperature Testing Testing the led bulb with 1...
Published by Ava11 29,2018
Suzuki Swift has a wider front and rear track and with more standard features in return for driving. Some guys prefer to upgrade reserve light into LEDs with their Suzuki Swift. It is a matter of personal preference. One thing for sure is that LEDs are much brighter than factory light, even the rear lights. You will not worried about cars and how the reverse lights “blink-on” in a moment when shifting into drive from park. This series LEDs designed with a built-in resistor and fit the OBC system that you can easily plug and play this bulb with your screwdriver. This Suzuki Swift has upgraded a series of LED reserve lights of W16W led bulb. It is with bright and white light penetration. Backup light is an important part of the automobile rear light; all vehicles are wanted to possess them. If cars do not have sufficient backup lights in the evening, another car behind it might not exactly see the reserving vehicle. It might cause an automobile rear-end coll...
